Summon
Summon allows you to park and retrieve Model 3 using the Tesla mobile app while you are standing outside of your vehicle.
Summon includes both Dumb Summon and Tesla Summon (ASS) .
Dumb Summon moves Model 3 straight forward and reverse into, or out of, a parking spot.
Tesla Summon is designed to move Model 3 to your location (using your phone's GPS as a target destination) or to a location of your choice, maneuvering around and stopping for objects as necessary.
While Summon is active, it is recommended that you maintain clear line of sight between you and Model 3. Closely monitor the vehicle and its surroundings at all times and familiarize yourself with the Limitations and Warnings.
Before Using Summon
- Enable Dumb Summon and Tesla Summon by touching . After carefully reading and understanding the pop-up window, touch Yes.
- (Optional) Customize Summon settings.
- Completion Sound: Select a sound to be played externally upon Model 3 reaching its destination. Requires a Pedestrian Warning System (see Pedestrian Warning System).
- Emissions on Abort: When enabled, Model 3 performs an emissions system test if your Summon session is aborted. Requires a Pedestrian Warning System (see Pedestrian Warning System).
- Bumper Clearance (Dumb Summon only): Set the distance that you want Dumb Summon to stop from a detected object. Note that this distance applies only to objects that Dumb Summon detects directly in front of Model 3 when moving forward, or directly behind Model 3 when reversing.
- Require Continuous Press (Dumb Summon only): Requires that you press and hold a button on the mobile app to continue moving Model 3. Model 3 stops when the button is released.NoteRequire Continuous Press is always enabled.
- (Optional) Enable Standby Mode: To keep Model 3 ready to summon and reduce the time it takes to warm up, turn on Standby Mode. Additional battery power may be consumed while Standby Mode is active. When Standby Mode is turned on, you can conserve Battery energy by disabling Standby Mode at these locations (see Home, Work, and Favorite Destinations):
- Exclude Home - Disables Standby Mode at the location you set as Home in your Favorites list.
- Exclude Work - Disables Standby Mode at the location you set as Work in your Favorites list.
- Exclude Favorites - Disables Standby Mode at any location in your Favorites list.
To conserve energy, Summon automatically exits Standby Mode from midnight to 6:00 am and when Model 3 is in Low Power Mode (see Low Power Mode). During these hours, a delay occurs as Summon starts up.
If Model 3 remains in Park for over 24 hours, Standby Mode disables until the vehicle is next driven.
- Download the latest version of the Tesla mobile app. Summon requires Tesla mobile app version 4.38.0 or later.
- Ensure that:
- Your phone is connected to Model 3 and that you are located within approximately 0 to 15 meters (see Operating Range).
- You are on private property. Summon is designed and intended for use only on parking lots and driveways located on private property where the surrounding area is familiar and predictable.
- The vehicle's cameras are fully calibrated (see Drive to Calibrate Cameras).
- You have a clear line of sight to Model 3.
- Model 3 is in Park, not charging, and all doors and trunks are closed.
- All four tire pressures are 34 PSI or higher, as reported by the Tire Pressure Monitoring System (TPMS). For more information about checking and maintaining tire pressures, see Tire Care and Maintenance.
Operating Range
To use Summon, your phone must be connected to Model 3 and within 0-15 meters of the vehicle. Vehicle speed is limited to 1 km/h for Dumb Summon and 10 km/h for Tesla Summon .
When Model 3 is close to, or has exceeded, the operating range of the feature, the Tesla mobile app provides haptic feedback and displays a message. If moving the vehicle to a destination away from you, you may need to follow the car to stay within the operating distance.
Using Summon
Follow these steps to use Summon to park or retrieve your Model 3.
The following steps describe how to operate both Dumb Summon, which moves Model 3 straight into or out of a parking space, and Tesla Summon , which allows Model 3 to navigate around obstacles to come to you or to location of your choosing.
- (Dumb Summon only) Align Model 3 with the parking space so that Model 3 can follow a straight path into or out of the space in either Drive or Reverse.
- Open the Tesla mobile app and press Summon.
- (
Tesla Summon
only) Come to Me: Position yourself anywhere within the blue circle where you have a clear line of sight to Model 3.Touch to select Come to Me mode. When selected, the icon is blue.
- (
Tesla Summon
only) Go to Target: Touch the crosshair icon, then drag the map to position the pin on a chosen destination. To subsequently change the location, lift your finger, reposition the map, then press and hold Go to Target again.Touch to select Go to Target mode. When selected, the icon is blue.
- Initiate Summon by pressing and holding:
- Forward or Reverse (Dumb Summon).
- Come to Me ( Tesla Summon ).
- Go to Target ( Tesla Summon ).
-
Model 3 shifts into Drive or Reverse, then moves slowly straight forward or in reverse (if you are using Dumb Summon), to your location (Come to Me), or to the selected location (Go to Target). In addition, headlights (as well as dome lights and, if equipped, fog lights) are set to On and wipers are set to Auto.
If you are using Come to Me or Go to Target, Model 3 navigates obstacles as needed. If you are using Dumb Summon, Model 3 attempts to avoid obstacles while staying very close to its original path. Dumb Summon is not designed to steer around obstacles significantly blocking its path. If Model 3 is unable to steer around an obstacle, Dumb Summon comes to a stop and completes.
It is recommended to have a direct line of sight to the vehicle while summoning.
- To stop Model 3 at any time, simply release the Forward or Reverse button, or the Come to Me or Go to Target button.
To resume Dumb Summon, once again hold down the Forward or Reverse button in the Tesla mobile app.
Likewise, to resume an Tesla Summon session, simply press the Come to Me or Go to Target button again.
- (Dumb Summon only) When Model 3 is in the desired position, release the Forward or Reverse button. When you release the button, Model 3 stops moving immediately and will shift into Park after several seconds.
- (
Tesla Summon
only) When Model 3 has arrived at your location (in Come to Me mode) or to the chosen location (in Go to Target mode), the hazard warning lights flash for several seconds, Model 3 shifts into Park, and the mobile app displays a message indicating that Summon has completed.WarningWhen you release the button to stop Model 3, a slight delay occurs before the vehicle stops. Therefore, it is critical that you pay close attention to the vehicle’s driving path at all times and proactively anticipate obstacles that the vehicle may be unable to detect.
Summon cancels, and requires you to restart it, when:
- A door handle is engaged or a door is opened.
- You interact with the steering wheel, brake pedal, accelerator pedal, or shift.
- The driving path is blocked.
-
Model 3 has moved the maximum distance of 475 meters, or has been moving for more than 7.5 minutes, since the start of the Summon session.NoteIf Summon moves Model 3 forward 2 meters and then backwards 1 meter, this is considered 3 meters of travel.
- Your phone enters sleep mode or loses connectivity to Model 3.
- Model 3 detects a safety risk.
Limitations and Warnings
Summon is disabled when:
- Model 3 is in Valet Mode (see Valet Mode).
- Model 3 is in Pet Mode (see Keep Climate On, Pet Mode, and Camp Mode).
- Model 3 is in Track Mode or Drag Strip Mode (if equipped) (see Track Mode).
Summon's performance depends on the ability of the cameras to determine the vehicle's proximity to objects, people, animals, and other vehicles. Summon is unlikely to operate as intended, and/or may abort, in the following types of situations:
- There is an accessory such as a roof rack, trailer hitch, body kit, etc. mounted on or otherwise attached to Model 3. When Summon is steering Model 3 to avoid detected obstacles, it does not account for accessories that extend beyond Model 3.
- A raised edge is detected. Summon does not move Model 3 over steep edges.
- Weather conditions (heavy rain, snow, fog, or extremely hot or cold temperatures) are interfering with camera operation.
- Model 3 is in Trailer Mode or an accessory is attached.
- GPS data is unavailable or there is poor cellular coverage.
- The driving surface is unpaved.
- The driving path has a slope of greater than 20%. Summon is designed to operate only on flat or gently sloped roads (up to 20% grade). When Summon is moving Model 3 on a grade higher than 10%, vehicle speed is limted to 5 km/h. Summon may not operate at grades above 10% if conditions are poor.